YeahECO^® EHD (Extremely High Density) strand bamboo deck is a solid, high-density engineered lumber. It is made of bamboo strips by a special process of thermal modification (at 392F/200C) and high pressure, which provides YeahECO^® EHD strand bamboo deck with impressive hardness and stability. The performance and weathering properties of YeahECO^® EHD strand bamboo deck are very similar to outdoor-rated exotic hardwoods.

Link to: datasheet of YeahECO EHD strand bamboo deck

Standard sizes available  ( customized size available on request)

    1860 mm * 140mm * 20 mm ( 72 4/5" * 5 1/2" * 4/5" ) 

Technical characteristics

•        Specific Gravity: 1.15 g/cu cm.  When tested accordance with ASTM D-792

•        Flexural Properties when tested in accordance with ASTM D6109:

•        Modulus of Rupture (MOR): 20,100 psi

•        Modulus of Elasticity (MOE): 2,103,000 psi

•        Direct Screw Withdrawal Force when tested in accordance with ASTM D-1761: 511 Ibf

•        Slip Resistance when tested in accordance with ASTM F-1679:

          Reeded / Ridged Side

a)    Dry    -   0.64

b)    Wet   -   0.42

          Smooth Side

a)    Dry    -   0.64

b)    Wet   -   0.47

•        Termites Resistance AWPA E1-09: Rating 8

•        Decay Resistance AWPA E10-12: Class A

•        Hardness when tested in accordance with ASTM D-143: 3,820 Ib

•        Water Absorption with tested in accordance with ASTM D-1037: %vol.<1.35%, %mass<1.29%

•        Flame Spread Index when tested in accordance With ASTM E-84: Class A (10)

•        Smoke Development when tested in accordance with ASTM E-84: Class A (40)

•        Flame Spread Rating CAN/ULC S102-10:  20

•        Smoke Developed Classification CAN/ULC S102-10:  25

•        Spread of Flame Test CAN/ULC-S107-10:  Class A

•        Intermittent Flames Exposure Test CAN/ULC-S107-10:  Class A

Leed information:

Under the LEED version 2009, the use of YeahECO^® EHD strand bamboo products may contribute following credits for the most applicable rating system – Building Design & Construction (BD+C):

•        MR Credit 6 – Rapid Renewable Materials

•        MR Credit 7 – Certified Wood (FSC Certified Product)

•        IEQ Credit 4.4 – Low Emitting Materials: Composite Wood (applies to all thermal modified and compressed Bamboo)

Under the LEED version 4, the use of YeahECO^® EHD strand bamboo products may contribute following credits for the most applicable rating system – Building Design & Construction (BD+C):

•        MR Credit 1 – Building Life Cycle Impact Reduction

•        MR Credit 2 – Building Product Disclosure and Optimization – Environmental Product Declaration

•        MR Credit 3 – Building Product Disclosure and Optimization – Sourcing of Raw Materials (FSC Certified Product), FSC®: Products available with FSC® certification on request.