Welcome to yeahECO!

Light Color Exterior Bamboo Clading Board

Send Inquiry
Products Description

Standard sizes available (*customized size by order with minimum order quantity required)

       1850 mm * 137 mm * 18 mm

       1860 mm * 103 mm * 12 mm

The bamboo cladding board consists of 87% thermalized bamboo fiber and 13% Phenolic Resin. It is with the following properties:

²  Moisture content: 8-13%

²  Density: ± 1150 kg/m3

²  Dimensional stability: length: + 0.1 %; width: + 0.9% (24 hours in water 20°C)

²  Resistance to Indentation - Brinell Hardness: ± 9.5 kg/mm2 (average value - EN 1534)

²  Bending strength: 84.4 N/mm2 (20 mm), 57.3 N/mm2 (40 mm) (characteristic value - EN 408)

²  Modulus of Elasticity: 17366 N/mm2 (20 mm), 18700 N/mm2 (40 mm) (mean value - EN 408)

       ²  Biological durability: Class 1 (EN 350 / CEN/TS 15083-2), simulated graveyard test / Class 1

²  Termites Resistance AWPA E1-09: Rating 8

²  Decay Resistance AWPA E10-12: Class A

²  Hardness when tested in accordance with ASTM D-143: 3,820 Ib

²  Water Absorption with tested in accordance with ASTM D-1037: %vol.<1.35%, %mass<1.29%

²  Slip resistance ( PTV20) 86 (dry), 53 (wet)

²  Flame Spread Index when tested in accordance With ASTM E-84: Class A (10)

²  Smoke Development when tested in accordance with ASTM E-84: Class A (40)

²  Flame Spread Rating CAN/ULC S102-10: 20; Flame spread index: Class A (ASTM E84)

²  Smoke Developed Classification CAN/ULC S102-10: 25

²  Spread of Flame Test CAN/ULC-S107-10: Class A

²  Intermittent Flames Exposure Test CAN/ULC-S107-10: Class A

²  Reaction to fire: Class B-s1-d0 (EN 13501-1

 

LEED INFORMATION:

Under the LEED version 2009, the use of YeahECO fused bamboo products may contribute following credits for the most applicable rating system – Building Design & Construction (BD+C):

²  MR Credit 6 – Rapid Renewable Materials

²  MR Credit 7 – Certified Wood (FSC Certified Product)

²  IEQ Credit 4.4 – Low Emitting Materials: Composite Wood (applies to all Fused Bamboo) 

 

Under the LEED version 4, the use of YeahECO fused bamboo products may contribute following credits for the most applicable rating system – Building Design & Construction (BD+C):

²  MR Credit 1 – Building Life Cycle Impact Reduction

²  MR Credit 2 – Building Product Disclosure and Optimization – Environmental Product Declaration

²  MR Credit 3 – Building Product Disclosure and Optimization – Sourcing of Raw Materials (FSC Certified Product), FSC®: Products available with FSC® certification on request.

²  IEQ Credit 2 – Low Emitting Materials

Leave Your Message


Leave a message